Welcome Dongguan TongZhou rubber machine limited company website, please call to buy mixer / mill / automatic slicing machine slitting line

Dongguan TongZhou Rubber Machinery Co., Ltd.
Contact: Mr. Xu
Cell phone: 13316692221 /13829297190
Telephone: 0769-85967970
Fax: 0769-23294120
URL: www.0769tz.com
Address: three Dongguan Road, Daojiao Town Pavilion Pavilion South Industrial Zone No. 5 Building

您当前的位置是:技术支持 >> Working mode of small mixer
Working mode of small mixer
发布时间:2016-09-29    文章来自:Mixer, small mixer, pressure type mixer, rubber mixer, open mixer - Dongguan TongZhou Rubber Machinery Co. Ltd.

A small mixer work, let TongZhou machinery Li Gong to introduce:
Mixer work, two rotor relative rotation, the material from the feed inlet will be clamped into the gap by extrusion and shearing of the rotor through the roll gap after hit top to sharp edge is divided into two parts, respectively along the wall and go back to the room before and after the rotor gap between the roll gap above. In a week around the rotor flow, shear and friction materials are everywhere, the compound rapid temperature rise, reduced viscosity increased with the wetting agent in the rubber surface, the rubber and compound full contact surface. With the rubber compound mass through the gap between the rotor and the rotor and the rotor, the upper and lower top, close the gap between the inner wall of the internal wall, by cutting and crushing, tensile deformation of rubber surrounded, stable in the broken state. At the same time, the convex edge of the rotor enables the rubber material to move along the axial direction of the rotor, and the mixing effect is played, so that the mixture is evenly mixed in the rubber compound. The coordination agent is repeatedly cut and broken, the rubber material repeatedly produces the deformation and the recovery deformation, the continuous stirring of the rotor convex edge, so that the coordination agent in the rubber compound is dispersed evenly, and achieve a certain degree of dispersion. Due to shear mixer when the rubber material is much larger than the mixing machine, rubber mixing temperature is high, the efficiency is much higher than that of the internal mixer mixing machine.
Author: Dongguan TongZhou Rubber Machinery Co., Ltd.

上一条:    Rubber mixer has the advantages and characteristics of those?
下一条:    What are the characteristics of the pressurized mixer?
  • Technology
  • 技术部
  • Sales
  • 业务部
  • Sales
  • 业务部
  • Sales
  • 业务部